Plastfolie til alle behov

Dine ønsker og idéer er altid vores udgangspunkt. Du bliver mødt med kvalificeret sparring i forhold til
fremstilling og udvikling af lige præcis det produkt, som du eller dine kunder har brug for.

Fortæl os, hvordan vi kan hjælpe dig

Fordi vores produktion er meget fleksibel, kan du også  få fremstillet kvalitetsprodukter i små serier til en fornuftig pris.

Skal vi tage en uforpligtende snak om, hvordan vi kan hjælpe dig videre med dit produkt.

Derfor Fjordblink Plast

    • Mange års erfaring med plastfolie
    • Kompetent sparring og produktudvikling
    • Høj kvalitet – også i små serier
    • Specialløsninger, der holder
    • Se dine idéer blive til virkelighed

Specialfremstillede plastprodukter

Fjordblink Plast leverer til medicinalindustrien. Det kan være produkter som colonposer
til kræftundersøgelse, luftpuder til anvendelse i fødekar, vandmadrasser til for tidlig fødte børn, siddepuder/trykaflastning, støttepude til benamputeret.

Fælles for alle produkter er, at de er designet efter kundens design og behov og Fjordblink Plast supporterer i udviklingsfasen ift. viden, design, materialevalg og produktionsmetode.

Du kan således få fremstillet et skræddersyet plastprodukt til dine specifikke
behov, hvad enten det skal indgå som en del af en større enhed eller optræde
som et selvstændigt produkt.

Kontakt os for en uforpligtende snak om dine behov for en unik løsning i plast.

Kontakt

Skalerbar produktion

Hos Fjordblink Plast behøver du ikke bestille produktserier på mange tusinde styk, før du er en interessant kunde for os.
Vi har gennem tiden hjulpet mange mindre virksomheder og privatpersoner med at føre deres idéer ud i plast og videre ud i livet.

Plasttyper

  • PE – Polyethylene
  • HDPE – High density polyethylene
  • LDPE – Low density polyethylene
  • PP – Polypropylen
  • PUR – Polyurethan
  • PVC – Polyvinylchlorid

 Svejsemetoder

  • Højfrekvenssvejsning        
  • Impulssvejsning
  • Varmesvejsning

Særlige løsninger

Påtrykt logo/grafik/tekst

  • Ventiler
  • Slanger
  • Studser
  • Flanger

 

Kvalitet, erfaring og samarbejde

Når du samarbejder med Fjordblink Plast, får du altid kompetent sparring i forhold til dine produktidéer og kreative tanker. Vi har mange års erfaring med plasticfolie
og de mange anvendelsesmuligheder, produkter lavet af plastfolie har. Desuden får du en samarbejdspartner, der råder over et fleksibelt produktionsanlæg,
der gør det muligt at få fremstillet også små serier af produkter.

Questions and answers

Why weld plastic?

At Fjordblink Plastic we employ three different welding methods. The method we use for your product depends on the product’s purpose and the type of plastic the product is made from.

  • High frequency welding
  • The weldable area on plastic blanks with dielectrical properties is clamped together and subjected to a high frequency magnetic field (of 13 to 100 MHz). The blanks remain clamped together until they have cooled down.

  • Heat welding
  • Heat welding is used to weld together two pieces of the same type of plastic. Two or more layers of thermoplastic foil are placed on top of one another. The heat plates are then placed in direct contact with the plastic foil at a specific pressure. The two or more layers of plastic will be melted together where the heat plates make contact with the foil. This welding method is used with many different types of foil for many different purposes.

  • Impulse welding
  • This method of welding can be used to weld together two or more layers of thermoplastic foil. The machine’s welding jaws lock around the foil at a specific pressure, clamping it together. A short pulse of electrical current is then transmitted through the welding wire, melting the layers together, and the pressure is maintained while the weld cools. Impulse welding is a strong, neat and fast method of welding.

    Contact us for an informal chat about welding your plastic product.

    How do we proceed?

    The first step is of course to contact us and tell us your ideas and your requirements. We will then propose solutions based on our many years of practical experience in the field.

    You will then receive a product description/design by e-mail, and this will form the basis of a meeting at which we establish the finer details of how we go about putting your product together.

    Once this has been established, the work of product development and manufacturing commences, all in close cooperation with you.

    We deliver the product on the agreed date to the agreed standard.

    Get in touch today – and soon your idea can become a reality.

    What type of plastic do you recommend?

    The choice of plastic depends of course on the product it is to be used for. The specific nature of the product will place technical demands on the foil, such as:

  • Watertight or airtight plastic foil
  • UV-resistant plastic foil
  • Plastic foil which is resistant to chemicals
  • Plastic foil which is approved for use with foodstuffs
  • Together we will find the right type of plastic for your product. We are happy to advise you in making this decision.

    Contact us for an informal chat about plastic foil.

    What is the shortest production run you offer?

    In theory we can offer very short runs, but in order to keep the unit price reasonable it is best as a rule to order a larger run.

    Can you manufacture my product in a cleanroom?

    We do not have a cleanroom at our production facilities, and therefore cannot produce plastic products for which a cleanroom is a stipulated requirement. You are of course always welcome to contact us if you need sparring and guidance. It may be the case that we are able to help you with your special requirements after all.